Junda Sandblasting machine in the use of the process will inevitably have the occurrence of failure, in order to better ensure the use efficiency and life of the equipment, then we need to understand
Abrasive water jet technology is an improvement of pure high pressure water jet technology. With the power of water, abrasive can impact the cutting object at high frequency to achieve the cutting ef
In the practice of Junda sandblasting machine, in order to ensure the stable operation of equipment and promote the use of equipment efficiency, we need to master the corresponding practical operation
That the samd blating to remove the rust on metal surface, which uses the compressed air as the power, is the common method for surface treatment. The abrasives, such as garnet sand, copper slag, qu
The ventilation and dust removal system of sand blasting machine is the key to the use of equipment, so before the equipment is put into use, the dust removal system should be adjusted and improved to
For garnet sand, whether in industry or life sandblasting is indispensable as abrasive use. But not all garnet sand can be used as a sandblasting abrasive, If the quality of garnet sand is relative
Chilled Iron Grit Blasting with chilled iron grit is ideal for removing existing coatings and burn off residue as well as providing a good key for painting. Chilled iron grit is also ideal for clea
Bead Blaster Cabinets From the name, you’d have noticed that this equipment is where the bead blasting process takes place. This cabinet must be of the highest quality to ensure the overall suc
The bead blasting process is quite similar to those of other abrasive blasting techniques. However, it involves the projection of sphere- or bead-shaped media against a substrate. Bead blasting is car
Stainless steel shot is widely used in surface treatment of non-ferrous metal die castings, castings, aluminum profiles, auto parts, machinery manufacturing, hardware, pump and valve industries. Mainl
Pyralspites are either red, orange, purple, or even almost black. Grossular and andradite are yellowish brown to black or green. Uvarovite is bright green. Garnet crystals are beautiful because they a
When used at a low pressure in equipment, garnet can be used successfully for many types of preservation work. It was used at the Eiffel Tower in Paris to remove a layer of wax from the granite base.
Brown fused alumina is a basic abrasive, widely used because of its good effect and low price. 1. Used for manufacturing high-end materials, castable,etc.; 2. Sandblasting ---- abrasive hardness mod
Junda Sand blasting machine, like most equipment, will certainly have failure in the use of the process, but in order to better solve this problem, to ensure the smooth operation of the equipment, it
2005-2022 © All Rights Reserved.HONEST HORSE (CHINA) HOLDING LIMITED